There are many ways to prevent this from happening, and most of them are basic knowledge or common sense that can help gearheads take care of their fuel system components while improving the performance at the same time. The first thing is regular maintenance. Regular tune-ups at every 30,000 miles and a fuel pump check is also making up to reducing the chance of burnout. The Automotive Service Association reports that regular maintenance can help a fuel pump last up to 50 percent longer.
Another important thing is to refuelrance fuel levels. This to develops the proper amount of lubrication and cooling for your pump. The pump can overheat running on low fuel, and according to the Department of Energy, this is one of the major reasons for premature failure.
Providing good fuel can help too. Fuel with detergents and additives will keep your fuel system cleaner. It was seen from research that use of cleaner fuels can reduce the risk of pump clogging by 30%. According to top experts in the industry, you should select fuel that meets or exceeds the American Petroleum Institute standards.
Installing a fuel pump relay can better protect your vehicle. However, this device is capable of controlling the electrical supply to the pump in a way such that the pump will never be able to pull more current than it should. Tests suggest a relay could diminish the potential for overuse by some 20%, especially in top-performance applications.
Wiring quality is vital as well. Preventing resistance is critical to prevent overheating, and one of the easiest ways to create this type of damage in a vehicle is bad wiring connections. According to a survey by the National Fire Protection Association, one-quarter of automotive electrical failures are the result of bad connections.
In addition to this, any pump-specific compatibility and the issue of not overdoing alterations in the fuel system is a great reason for just leaving things aside. The pump may go into burnout quicker if you adjust the engine, or fuel system increasing the pump load. Automotive expert Mark Ellis put it best, “Always follow manufacturer guidelines for best performance.”
Last but not the least, investing in good components would help a lot. Low-quality, worn-out fuel pump will most likely burn out due to a lot of factors acting above its operation conditions but a high-performing Fuel Pump designed for your car model can significantly decrease this kind of cases in order to keep it operating efficiently. According to consumer reports, quality parts can last up to 70% longer than cheap parts.