Excuse me, which is better in Guangzhou custom wardrobe

Many brands of Guangzhou are good, mainly to look at the style you need and do not need customization. Just pay attention to the following points when buying a wardrobe ~
. Look at the bottom rail
. When the custom wardrobe buy the door, try to choose the same bottom rail with the same material, as a material, and a material, and a material, and a material. I thought the bottom rail was a load -bearing part. To withstand repeated friction, custom wardrobe must be high and wear -resistant. The bottom rail uses aluminum -magnesium -titanium silicon alloy intensity, strong resistance to deformation, and can have a longer service life of custom wardrobe.
. Look at the rubber strip
The main materials popular on the market are PVC rubber, silicone, etc. Among them, silicone strips are made of non -toxic, non -corrosive silicone materials. Ultra -low temperature can also maintain good toughness, ensuring the flexible connection of board and profile.
. Look at the glue, edge band, veneer
The edge bands mainly seal the section of the plate. The custom wardrobe achieves the destruction of plate materials from the disadvantages of the environment or in the process of use. Customized wardrobe also achieves decorative effects. Ordinary glue will have a pungent odor because it contains formaldehyde and is also risk of carcinogenic. So pay attention to the odor of the cabinet when buying.
. Seeing profile
The practical profile substrates: one is aluminum alloy and the other is plastic steel. Customized wardrobes are high -end materials for migration substrates due to the characteristics of light weight and high strength of aluminum alloy. Plastic steel products have been gradually replaced. Customized wardrobe and aluminum alloy itself are divided into ordinary aluminum -magnesium alloy and smaller special aviation aluminum and magnesium alloy. Customized wardrobes have higher strength and smaller weight due to aluminum -magnesium titanium silicon alloy. Therefore, it is favored by consumers, but the cost is several times more than ordinary aluminum -magnesium alloy. When looking at the profile, you must not only pay attention to the substrate, but also observe its surface treatment. Advanced surface treatment has anode oxidation, electrophoretic membrane carbon spraying and other processes. These processes have higher hardness and aesthetics than simple spraying and electroplating. Customized wardrobe the film thickness of the electrophoretic coverage used by the US KD reaches 20 microns, and the adhesion is to reach the international highest standard 0 level, which has unparalleled anti -scratching harm.
. Look at the bottom wheel
The top wheel of the custom wardrobe is an important accessory of the door. Pay attention to the use of high -quality bearing pulleys. Customized wardrobe bottom wheels are made of glass fiber reinforcement materials, which have the characteristics of high strength, abrasion resistance, and low noise. Using push -pull more than 100,000 times, the custom wardrobe wheel is treated in three degrees of polishing, and it will never rust.
6. The viewing board, substrate
The apovenials commonly used in the cabinet board include fine woodwork, density board, and moisture -proof particle board. The most cost -effective one of the custom wardrobes is solid wood granular boards and moisture -proof particle boards. The advantages of high strength and strong nailing power are strong.

Demulu Luo Custom Home Address: No. 299, Huangpu Avenue, Tianhe District, Guangzhou (Exit A of Keyun Road Station of Metro Line 5)